Why most home batteries now use LFP chemistry, and what sodium-ion could change
Lithium iron phosphate (LFP) now dominates stationary storage. What the IEA's figures show about LFP and nickel chemistries, why storage favours LFP, and where sodium-ion fits.
Established technology
LFP is established in storage. Sodium-ion is emerging, at roughly 1% of lithium-ion manufacturing capacity in 2025.
Part of the Future Innovations collection.
Almost every new grid battery and most new home batteries now use lithium iron phosphate, known as LFP. The International Energy Agency (IEA) says LFP made up over 90% of stationary battery storage installations worldwide in 2025, and more than 55% of electric vehicle batteries. The shift happened quickly and mostly for cost reasons, not because LFP stores the most energy in the smallest space.
This article explains what the chemistries are, what the IEA figures show, and where the newer sodium-ion idea fits. It is a short, source-based discovery, not a product comparison.
Two families in plain language
Lithium-ion batteries differ in what the positive electrode (the cathode) is made of.
- NMC and similar chemistries use nickel, and often manganese and cobalt. They pack more energy into each kilogram.
- LFP uses iron and phosphate and no nickel or cobalt. It stores less energy per kilogram but is cheaper.
Your Home, the Australian Government's guide, describes both as common grid-connected lithium chemistries and says LFP is safer but less efficient than NMC (Your Home). We have not tested this, and the efficiency difference for a complete home system depends on the product.
What the IEA reports
From the IEA's Global EV Outlook 2026 (battery chapter):
- LFP accounted for over 55% of EV batteries deployed globally in 2025, up from nearly 50% in 2024.
- Outside China, almost 80% of EV batteries in 2025 were nickel-containing chemistries such as NMC. LFP's share of EV batteries in the United States almost halved in 2025 from a low base.
- LFP accounted for over 90% of global stationary battery storage installations in 2025.
- In 2025, LFP packs were more than 40% cheaper per kWh than NMC on average. The IEA notes that part of this reflects stationary storage needing less energy density.
The IEA's Global Energy Review 2026 says battery storage is the fastest-growing power technology and that LFP makes up about 90% of deployments, compared with well below 50% five years earlier (Global Energy Review).
Why storage favours LFP
A home or grid battery sits in a shed, garage or container. Weight and volume matter less than in a car, so LFP's lower energy density costs little, and its lower price counts for a lot. This is our reading of the IEA's observation above, not a finding by us.
The supply-chain catch
The same IEA chapter says production of LFP cathode materials is almost entirely concentrated in China, and that Chinese producers held almost 75% of global EV battery deployment in 2025. Cobalt supply is concentrated too, with the Democratic Republic of the Congo providing almost two-thirds of the world's cobalt. So LFP avoids cobalt and nickel, but not supply concentration.
Where sodium-ion fits
Sodium-ion batteries use sodium instead of lithium. The IEA gives these figures for the latest cells:
| Chemistry | Energy density, best current cells (IEA) |
|---|---|
| Sodium-ion | up to 175 Wh/kg |
| LFP | up to 205 Wh/kg |
| NMC | up to 265 Wh/kg |
The IEA adds that the latest sodium-ion generation retains around 90% of nominal capacity at minus 40 degrees Celsius, that CATL and BYD are scaling the technology, and that sodium-ion manufacturing capacity was just over 1% of lithium-ion capacity in 2025. Announced projects for 2030 equal about 7% of committed lithium-ion capacity.
The honest reading: sodium-ion is real, in production in China and worth watching, but at the time of writing it is a small share of the market, and we found no Australian home battery data on it.
What this means for a buyer
Most home batteries offered in Australia are likely to be lithium-ion, and many will be LFP. We have not surveyed Australian products for this article, so check the datasheet. The chemistry is less important than the usable capacity, power, warranty and installer quality, which are explained in our guide to reading home battery specifications.
About this article
Written from two IEA publications and one government guide, read as web pages on 16 November 2026. The IEA figures are global and for 2025, not Australian. We did not independently verify them, and the IEA's price comparison mixes vehicle and stationary products. Chemistry safety claims come from Your Home and have not been tested by us. Sodium-ion performance figures are the best current cells reported by the IEA, not a typical product.